USB Countdown Timer Socket Plug

USB countdown timer socket can be customized to meet the standards of Germany, Britain, Australia, the United States, France, Italy, Israel, Belgium, Denmark, South Africa, Brazil and other countries

Function description

The socket is ordinary converter，with two output 5V 2A power USB power supply at the same time，can be very convenient in use electrical appliances and recharge the equipment at the same time，such as digital products like Iphone Ipad，MP3,MP4 etc.The charge apply to full range of international AC output，no-load power consumption less than 0.3W，with short circuit，overload，over-voltage protection，can be convenient for your life and save more energy

Timer Control Time Adgustment

1.Press the power switch 1 time,the 1HOUR LED will light on.The Timer into ON mode,USB and control socket output ON .

2.Continuously press the power switch the LED light on,the Countdown mode and LED light on will cycle change from 1HR,2HR,4HR,6HR,8HR,10HR.

3.Choose you need countdown time mode,the mode LED will lighto on,start countdown until countdown time finish,the control output and USB change to OFF

4.Then the countdown is start,The Time indicate LED will from high to low auto change until Countdown finish off.

Failure analysis：

1.check whether the power supply connection is good

2.check whether the USB cable is loosen

Warning Note:

1.Use indoor and dry location ONLY

2.The load max does not exceed 16A 3600W

3.This product does not convert voltage please do not miss use DO NOT exceed the maximum loading of 3600 Watts 16A

4.Always have earth connection for safety reason

5.If in doubt please consult with a qualified electrician